|
High voltage dual power supply, can output positive and negative pressure, also can output two paths of high-pressure or two way negative high voltage.
USB2.0, RS-232C, RS-485 control
The output voltage from 1KV to 150KV
Integrated adjustable AC filament power supply
Overvoltage protection and output short circuit protection
Voltage and current regulation function
Can be remotely adjusted emission current
Safety interlock function
Can be customized according to user requirements
Wisman XRB series high voltage power supply is X - ray tube for power, it integrates the output AC voltage 15.5V, current 0.3A to 5A adjustable filament power supply.Hypertension and filament current can realize the linear steady rise.XRB series power supply also can be connected with the potentiometer to realize the remote control of output voltage and current, and has an external voltage and current display, high voltage output end of overvoltage and short circuit protection, safety interlock function.
Typical application:
X ray fluorescence spectrometer, paper, film, foil thickness measurement, elemental analysis, X ray, particle size measurement, density measurement, the paper component detection, on-line process control, ROHS testing, thickness, printed circuit board inspection system, X ray fluorescence analysis, radiation radiography, X ray imaging, multilayer PCB counterpoint, particle size measurement, density measurement, process control, X ray spectroscopy, welding, wire head detection corresponding to the X (X-ray tube cathode or anode grounding):
Kevex, Oxford, RTW, Superior, Varian, Trufocus and domestic brands.
Optional function:
DC DC filament power supply
CPC constant power output
Specification:
Input: AC, DC, maximum current 3.25A.
Output: 1KV, 2KV, 3KV, 6KV, 8KV, 10KV, 20KV, 30KV, 40KV, 50KV, 65KV, 80KV, 90KV, 100KV, 120KV, 140KV, 150KV, the 15 highest voltage output optional, 0V to the highest voltage adjustable.
Voltage control: internal power supply: power supply with multiturn potentiometer can be output voltage settings in 0V to the highest voltage.
External remote control: external 0 to 10V control signal can be output from 0V to the maximum output voltage.
The internal power supply: power supply with multiturn potentiometer can be set in the 0A electron beam current to a maximum current.
External remote control: external 0 to 10V control signals can be set in the 0A electron beam current to a maximum current.
DC filament power supply: output current is adjustable for 5A, voltage 115.5V.
Voltage regulation rate:
Relative load: 0.01% (no load to rated load)
Relative to the input: ± 0.01% (a change in input voltage of ± 10%)
Current regulation:
Relative load: 0.01% (no load to rated load)
Relative to the input: ± 0.01% (input voltage variations of ± 10%).
Output ripple voltage: rated voltage condition, the ripple voltage peak
Value of the maximum output voltage 0.25%.
Environment temperature: 0 ℃ to +50 ℃.
Temperature coefficient: 0.01% per degree celsius.
Stability: starting up half hours after every 8 hours less than 0.05%.
Voltage current instruction: 0 to +10V, rated output condition and precision of 1%.
Dimensions: length 254MM, width 100mm, high 160mm
Connector:
High voltage output connector: recessed insulating conduit and into the high voltage cable through the diameter of 16mm metal connector.
Input output connector: DB9, contains the control and display signal.
The output voltage and current of the remote control:
External potentiometer can be used inside power supply 10V voltage reference on the output voltage and current for remote control.
Remote voltage indication: JP4 contains 0 10V voltage and current indicative signal, can be externally connected with various number or pointer table.