YB 6-450 Flexo printing machine

Feature:

1. From the discharge to the receipt of the short distance.

2. The ceramic stick is equipped with a scraper, which is printed and moist, and has a clear color.

3. Repeatedly printing the circumference of 190.5-635MM, filling the blank of the cascading flexographic printing machine, the slanting trademark printing machine, the petal printing machine and the printing length.

4. The use of gear color to solve the 360-degree coloring device gap, assembly, wear, etc., affecting the color accuracy and printing instability.

Technical parameters :

Printed form: Flexo roll to roll

Printing speed: 10m/min－100m/min

Mechanical speed: 10m/min -110m/min

Maximum width of substrate: 450mm

Printing width: 50-450mm

Printing circumference: 190.5-635mm

Plate thickness :1.7/ 2.28mm(special advance notice)

Anilox roller: specifications Φ85*450*7

Aluminum guide roller specifications: Φ70*450

Printing bottom roller: Φ85*450

Unwinding maximum diameter :Φ550 mm

Maximum winding diameter :Φ550 mm

Oven maximum temperature:80℃

Substrate core diameter :74mm

The machine configuration:

1. Unwinding device:

1) Single arm center roll up

2) Maximum diameter of unwinding: Φ550 mm

3) Inflatable shaft specification: 3”

4) Number of inflation shafts: 1

5) Tension control range: 0-50kg

6) Tension control range: 5KG,

7) Analog Correction System  1 set

2. Printing unit

1) Drive mode: geared motor drive, synchronous belt drive.

2) Printing plate shaft:

(1) Vertical color: manual

(2)Horizontal color: manual

3) Overall composition: plate roll, scraper, ink tray, anilox roller.

4)Scraper: It adopts one-way scraper. The material of the scraper is made of high-strength aluminum alloy profile, which is convenient and quick to load, unload and clean.

4． Drying device:

1) Each color group is equipped with strong wind + LED curing

2) The oven electric heating and fan intelligent control, the temperature inside the oven can be controlled.

5．Winding device

1) Winding method: One-arm center curl

2) Paper core installation method: Expansion shaft expansion 1

3) Inflatable shaft specification: 3 inch

Supporting facilities (users are responsible for their own)

1.Power supply: 3-phase *380V*50HZ, three-phase west line system

2.air compressor: 1KW (1 set)

The above technical parameters and pictures are for reference only :

Packaging & Shipping :

Pre-sale Service

1. Equipment model selection;
2. According to the special requirements of customers, personalized customized products;
3. Train technicians for customers free of charge;
4. Free professional technical engineers to plan the site on site and design the best process and plan.

5. Acceptance of the product;
6. Assist the client in drafting the construction plan;

Medium-sales Services
YIBO have the trained team to follow your orders methodically to guarantee the products can be finished on time with high quality.

After-sales Service

1.One Year Warranty,As long as there is a non-human fault in a year,free re-placement parts.
2.Parts Replacement,Don’t worry about the parts damaged or not sold after the machine is sold.we have a field factory with hundreds of enployees to serve you.
3.Engineer Asssignment,Lifelong maintentance,If your equipment breaks down,we will arrange engineers to repair it.
4.Online Instruction,We open online services,as long as your equipment failure,our engineers will be the first time for a one-to-one trou-bleshooting.
5.Feedback Survey,The engineer is required to bring a questionnaire to fill in the satisfaction with the engineer and the use of the equipment.

http://www.yibomachinecn.com/