LQ-MD330DS Digital Enhancement System

Features:

1. Inline web cleaner and corona treatment

2. Digital Inkjet varnish

3. Digital inkjet foiling which able to use all traditional cold foil

4. UV LED curing capability with Pinning

5. Ability to printing image with diferent raised effect

6. Maximum speed up to 30 mpm with a print width 288mm and maximum length 5 meters

7. Online printing registration

Configuration:

1. Unwind Section

a. Hydraulic lifting device drives unwind part

b. Shaft-less design with 3 inch mandrel

c. Maximum roll diameter 700mm

d. Unwind adopts pneumatic control, magnetic powder will burn due to too hot because of long time’s using.

e. BST web guide system & Tension control system

g. Corona Treatment – improve substrate surface tension

h. Web Cleaner – Remove dust particles from substrate (Single side only)

2. Print Tower Section

a. Cue Sensor for pre-print registration

b. Encoder to detect line speed of print so that the printed image is within specification length

c. External Ink bottle cam in the form as customer purchase the varnish

d. Ink supply system to draw ink from external ink bottle to secondary ink tane then to printhead with temperature control

e. Printhead where RIPPed images are been sent for printing

f. Printhead mounting which is a manual mounting to allow operators to clean/purge the printhead when it is need

g. Pinning LED lamp to prevent big dot gain and obtain good raisen effect

h. Curing lamp to final curing the UV varnish

i. Controller which allow customer to do job prep and adjust paramter during operation and service. Main console to access to printhead paramter. It also RIP the printed image to a format that acceptable by the printhead

3. Rewind Section

a. Foiling section

a) With unwind and waste extractor

b) Maximum roll diameter is 400mm

c) Come with a tension pressing unit

b. Manual lifting

c. Shaft-less design with 3 inch mandrel

d. Maximum roll diameter 700mm

4. Auxiliary Equipment

a. Corona treatment controller

b. UV LED curing & Pinning PLC Controller

c. Chiller

5. Quality check section

6. Transport control system

7. Printing and ink system control unit

Specifications:

Digital Printing Engine
Printing Method	UV Piezo-Electric, Drop on Demand inkjet Printing
Image Resolution	Max 1080x360 dpi
Printing Speed	6mpm - 30mpm (depending on printing thickness)
Supported variable file format	PDF and varies barcodes format
Supported image file format	PDF, PDF/VT, TIFF, BMP file formats
Substrate	Offset print, digital print, flexible material, lamination & other pre-coated material
Print Width	Max 288mm x 5M
Ink Polymer	LED-UV Curable Ink, Dedicated transparent varnish
Printing Thickness	10-200um
Curing Method	LED-UV pinning / LED-UV curing
Transport
Max Unwind Dia	Max Roll Dia 700mm, core shaft @76mm
Max Rewind Dia	Max Roll Dia 700mm, core shaft @76mm
Substrate Thickness	30um-400um
Max Web Width	330mm
Machine Dimension (LxHxW)	3500 x 1900 x 1800mm
Production Envirnoment	Temperature: 15-30 degree celsius
	Relative humidity: 40%-80% Non feezing
Power requirement	Voltage 3 x 380; +/-5%; 3 phase +G+N (Star connection)
	Frequency: 50, 60Hz
	Current: 25 Amperes
	Capacity: Avg: 13.5KVA @ Production
	Max: 30KVA
	Cable Requirement: Min 50A
Machine Weight	Approx 2500kg

http://www.upg-digital.com/